Wildbill

Hi,
Can you let me know full build spec of the heads and if you have flow test the heads?
What kind of cams, springs, valves etc etc.
Thanks. Kenny

go to church and repent your sins and all will be forgiven. plus $100 to the father as a bribe..

if you want to drive a wreck, you drive a FORD a wreck with lid bashed in nailed to a piece of board IF YO WANT TO DRIVE A WRECK YOU DRIVE A FORD FORD HAVE CIRCLED THE PROBLEM it must be...

I wasn't talking about your weight, I made a reflective comment on the colours of your race suit..

plenty of boost will help!! plus plenty of corn juice on the rocks

with 589hp and 732nm my car did 10.4 @ 137mph should note i changed headers from unequal to equal and lost 10hp at top end but more torque in the mid range its now has 630ponnies and a healthy...

i think my rev limiter is set @ 8300rpm that helps in having a tall ratio box and plenty of grunt..love that torque good to see my old 3076 went to a good home to be caned and thrashed...

i think my rev limiter is set @ 8300rpm that helps in having a tall ratio box and plenty of grunt..love that torque good to see my old 3076 went to a good home to be caned and thrashed...

with 589hp and 732nm my car did 10.4 @ 137mph should note i changed headers from unequal to equal and lost 10hp at top end but more torque in the mid range its now has 630ponnies and a healthy...

food for thought, 1 could use a an old closed deck block from a RS liberty or early RA, bore out the 2litre to 97mm or 99mm bore and insert a diesel liner, change to rear thrust. it works!! I use...

food for thought, 1 could use a an old closed deck block from a RS liberty or early RA, bore out the 2litre to 97mm or 99mm bore and insert a diesel liner, change to rear thrust. it works!! I use...

my 2.5 motor is set at 8,500rpm and I bounce on the rev limiter regular as it revs so quick, I use the longer liberty rods with wisco piston to suit...

here in the west we only eat sheep.

at first glance I thought this was a 300kph club if this was the case it would be very short on membership I know of at least 1 that could attain this speed... its very lonely at the top

I brought a subi lawn mower, works great plenty of power

I brought a subi lawn mower, works great plenty of power