Rear rotors sorted, DBA = Rip.

DBA 42657SL (x1): AUD 297.00
DBA 42657SR (x1): AUD 297.00

__________________
[SIGPIC][/SIGPIC]
Should have bought an STI

thats the price i was given when i did my rear brembos ended up buying a set that turned up on ricenet that had not been used but had been opened for $400

__________________
race tape y pipe running .05 bar till spares turn up.

Yeah good deal mate. With the rears - Did you just need the dogbones to mount, or do you need the OEM Bracket + Dogbone to get them on?

I got the rears for a good price.

+ Need a source on dogbones (Not coles, butcher etc)

__________________
[SIGPIC][/SIGPIC]
Should have bought an STI

no dogbones needed straight bolt-on for the bugeye just need to get rid of the heatshield that is on there but be gentle when doing this i managed to distroy the abs tone ring when i did mine with a big hammer and cold cheisl

__________________
race tape y pipe running .05 bar till spares turn up.

Sweet ! dogbones looked like a pain - Mines a MY01, not an 02 - But figured same same for rear hubs/brakes. - Still looks like i will need the OEM mount for them then - which I do not have ... fark. (actually, they turn out to be vibration dampners, not mounts .. not needed)

No worries re: dustshield. Had to fuck that off the front end too when i did the brakes up there.

Cheers mate, good info - So the dogbones are only needed for rear brembos on GC's then??

__________________
[SIGPIC][/SIGPIC]
Should have bought an STI

yup only on the GC and the forry i think

__________________
race tape y pipe running .05 bar till spares turn up.

Nice mate. Looks like the rear brembo bolts are also M12 x 1.25 (Same as WRX 2 pots)

__________________
[SIGPIC][/SIGPIC]
Should have bought an STI

if i remember well i think they are a little bit longer not sure on that one anymore as i havent taken the rears off in a while and am not in town to have a look at the size

__________________
race tape y pipe running .05 bar till spares turn up.

Yeah i think you're right. Mister_Two made a comment on the same thing, whereby he had to use a washer to stop the bolt from fouling the rotor.

After looking around, the rears look to be: M10x1.5

http://www.rexnet.com.au/forum/index...ion-dampeners/

__________________
[SIGPIC][/SIGPIC]
Should have bought an STI

I know i am slow on the uptake but the new lip looks good rich!

__________________
Avatar courtesy of GTR owners club.