No, but it is close. Looks like it's touching from that angle though.
Thanks for the heads up. I'll keep an eye on the state of the bumper.

On a side note, the amount of heat that has occurred in the original headers has coloured them to a purple... I'm sure the girl driver that owned it before caused that!


Sent from my iPhone using Tapatalk

__________________
Wide Body GC8 WRX
#217 Street Cars WA
Full 04 STi drivetrain
08 JDM 207
Garrett 3076 xtr

She must of because I've never revved the engine past 2500rpm.

Just to put it into perspective for everyone..

Scott rocked up at 2pm and the intercooler, exhaust, headers and up pipe all off by 3.30pm. Headers and up pipe back on really quick say about 4.30pm. Kel jumped under the cad to use her little fingers to get the dump pipe back on apart from one of the fixed bolts had come off instead of the nut. We couldn't get it on so the whole dump pipe off again, put in new thread and back on again. Dave and Kel put the exhaust on really easily. Exhaust and headers done by around 6.00pm. Dave left and Scott and I decided to do the gauges... By 10.00pm the gauges were done apart from the water temp as the fittings didn't fit the radiator temp point.

Start the car, wide band AFM working, oil temp not. Ran can for about 10 minutes with no change. Get out and oil around sensor and floor... Fuck.

Intercooler off at 10.45pm, sensor out, plate back on... Send Scott home...

The sensor is slightly smaller thread than the plate screw... Scott has to get 2 sensors for oil and water temp so it'll work. All the wires are run so pretty easy from here on in...

Loved every minute of it, between Dave's jokes, kel's dirty mouth, Scott's stories it was fantastic! Then drunken neighbors giving us helpful hints topped the night off!

Car sounded mint aswell mate!


Sent from my iPhone using Tapatalk

__________________
Wide Body GC8 WRX
#217 Street Cars WA
Full 04 STi drivetrain
08 JDM 207
Garrett 3076 xtr

Love it when club members help each other out!

Looks cool Scott bet you can't wait to not be the quietest person out at Barbs

__________________
hello my name is tommy
i don't have a Subaru

Good stuff mate!!! Keen to hear it go flying past pit lane at the next no limits or the antilag night on the 30th

__________________
Cheers,

Simon.

WHS!

Looking forward to seeing you gun it down at Barbs at the next no limits Scott

Think I've heard that the latest load of Illegal immigrants have found a new home!

But seriously, nice work, hope it does what you want it to do.

__________________
Race Torque Dyno 399 NM, 248Kw @ 20PSI

Straight roads are for fast cars, twisty roads are for fast drivers. I have or am neither.

http://tttmsp.smugmug.com/

So I have decided to throw caution (and some of you will say taste) to the wind and go down a new path with my car.

I've decided to go down the JDM fanboy/USDM track as far as aesthetics go. As far as performance mods etc go it will still be aiming at a trackable daily but seen it's got crappy chipped paint I thought I'd go a different route with the looks side of things.

I know most on here hate this scene/movement/look/idea/whatever but I'm going to god-damn sticker bomb the shit out of the motherfucker.

My first sets of stickers arrived today:

i like when do the stickers go on ?

__________________
Bitches love cardigans