First time poster, long time reader... - Page 3 - Perth-WRX.com

s20525xxx · #21 29-12-2014, 11:54 PM

Quote:

Originally Posted by JRecardo

Here's a small comparison for you.

I get ~430nm torque at 3800rpm which as you'll see is the same time as the turbo has kicked in. Then I have a dip and rise again after that, which I am told is something the EJ25s are prone to but I could be wrong.

Looking at your sheet however and you're only making 260nm at the same rev range? Again I'm not the most knowledgeable person here so I've been holding my tongue, but it seems as though every EvoR tune I see comes with disappointingly laggy results.

Don't want to take the wind out of your sails either, I'd be stoked with 360hp, but the response looks like it leaves a lot to be desired.

Dyno sheet attached for reference. Same turbo, pump, and injectors as you. I am on E85 however.

Dyno day?

using the Perth-WRX mobile app

GTB Liberty · #22 30-12-2014, 11:30 AM

Quote:

Originally Posted by Lil Foley

Yeah I'm still a bit suspicious as to whether I've been sent the 2.5, I know it was a rookie error, but didn't double check which Dom it was (was just a bit excited when it arrived)

Speaking with PSR however, they were adamant the 1.5 was sent...

USA Dave's Porka Pickle 2.5 snail, Big TMIC (Prowest's?) and ID 1000cc injectors on 98.

Something isn't adding up and I can make a educated guess as to what ... it's been said many times before.

RUSSGT · #23 30-12-2014, 11:55 AM

Tune looks good to me. Nice results mate. Lag is what gears are for. haha

Lil Foley · #24 12-05-2015, 05:57 PM

Had my first full day off in a while and the betty was looking especially ugly. A few hours of TLC and the paint and windows are better than when I did the first detail.

Adam's clay bar kit was the deciding factor imo, the finer clay bar with the detail spray took absolutely everything with it (including on all windows once the clay was a bit too dirty), followed by Meguires Ultimate polish and 2x coats of NXT tech wax 2.0.

Unfortunately the phone's camera has kicked the bucket so no photo's, but it's a white car, so you get the picture...

mitchwnz · #25 13-05-2015, 12:36 PM

Hey there!

Nice car.. Love the white Betty.. makes me miss mine.

shaunus · #26 13-05-2015, 01:26 PM

Have a feeling yours might have made it's way to Kal! If not, it has a twin

motobroker · #27 14-05-2015, 05:36 PM

Hi! I'm Brendan, I'm new here...hopefully I'll get around to posting ...

Brodz · #28 14-05-2015, 06:05 PM

Quote:

Originally Posted by motobroker

Hi! I'm Brendan, I'm new here...hopefully I'll get around to posting ...

You just did

Sent from my iPhone using Tapatalk

Lil Foley · #29 19-06-2015, 04:49 PM

Hi guys, I've done a little bit of a search re silicon intakes and there doesn't appear to be much difference between the brands in terms of quality/performance. Was just wondering if anyone has their 2c to put in re particular brands recommended or otherwise?

Kremer930 · #30 19-06-2015, 05:37 PM

Make sure it is at least 4 ply and that it kicks sideways to comfortably clear around the TGVs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Types of events & what you need to get involved	Rally_Action	Local Motorsport	1	03-07-2012 11:00 AM
Long Time	[sleepr]	Introductions	5	13-07-2011 06:57 PM
Funniest thing i seen in a LONG time ! :D	DVSLYQUIK	Non-WRX Discussion	5	16-09-2008 09:02 PM
hello - long time reader, first time poster :)	thebish	Introductions	5	10-11-2005 04:02 PM