This is quite a simple question really....for someone that has the knowledge.

as above, is this possible without too much messing around? I wont be doing the work myself.

I trashed my 02 STi and a smick '00 GC shell has come up. Is it possible to do a motor swap? ie 02 motor into 00 body?

Any info would be appreciated

engine will bolt straight in. only issue will be if you want to run the avcs you will need a different computer and to run a couple of wires. if you dont want to run the avcs then you need to changes the pulleys.

if you swap the gearbox over aswell you need to get a different tailshaft etc.

both swaps have been done a million times and are a great upgrade.

Brendon

__________________
Losing is worse than death. You have to live with losing....

thank you very much urabus

what about using the STi computer and loom? what does avcs stand for? pardon my ignorance

I'm planning on using the 6 speed.

all the info is here if you search a little through the mechanical sections

__________________

Long live the WRC

Is this 00 shell road registerable?

__________________

221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600

EBISU SUBARU, SHIBUYA-KU TOKYO

Yes.. and build motor not sure why bothering to changing the motor to 02 sti...?

__________________
[SIGPIC][/SIGPIC]11.617 120mph

Best thrfead to suit your questions, links to other forums for more info contained within as well http://www.perth-wrx.com/vb/showthre...ight=driveline

Because he already has an EJ207, 6 speed, brembos etc all of which he has in his possession. Why fork out money to build an engine which it seems not many think is of any benefit over a factory forged item? Unless it was to be stroked of course and even then 99% of people recommend an EJ207 for simplicity/cost.

__________________
No more GC8, sad face.
[SIGPIC][/SIGPIC]

Well that explains it.. but still its going to be a head ache converting.. the gc rolling shell has its goodies like the 207 with Je pistons and eagle rods, brembos not 6speed but straight cuts etc etc then again its his choice..

__________________
[SIGPIC][/SIGPIC]11.617 120mph

Sounds like you know the shell he's looking at getting. If it has all that stuff well yeah, put the 6MT in then sell the straight cut box and his 02 STI motor for profits.... I read it that he'd just found a bare/minimalist shell he could swap everything into.

__________________
No more GC8, sad face.
[SIGPIC][/SIGPIC]

Why do this ? I think there is a misconception that because the GC shell is lighter that it is better than a GD shell ? IMO there is good weight and a GD will be quicker than a GC ?