Hi all,

I have a wiring issue with my DCCD, the gearbox i'm quite sure is a V5 RA box. The issue I have is that the wires coming from the gearbox don't plug into the DCCD wheel (I have been told after trying to source a new DCCD wheel that V2 to V7 or something like that have the same plug type), and I do not actually know if they are the correct wires..

I have sourced a plug which fits into the bottom of the wheel and tried to place the wires from that plug into the pins of the one coming from the box however it still does not seem to scroll the lights on the dash no matter what way it is wired up..

Below is the wires coming from the gearbox (3 x green, one has a yellow, one has red and one has orange stripe on them).

I have found a V4 DCCD wiring diagram however can't seem to find those color wires on it, but they may be different..

Does anybody know what the green wires are if they are not my DCCD wires? am I missing another wiring harness maybe?

Also would anybody know what the wires going into the back of the DCCD plug look like/what color they are, I have tried searching but to no avail.. It would be a massive favor if somebody was able to take a picture of them (if you have a DCCD) or has a picture..

Any advice would be greatly appreciated as this is one of the last things to sort out in order to get my car tuned..

Cheers,
Tom

V4 wiring from another post..
http://www.perth-wrx.com/vb/mechanic...dccd-help.html


Pictures by tom_spoon - Photobucket

__________________
Twin Scroll GC8 DCCD FTW... tune and on road shortly!!