|
Register | Diddy Kart | Articles | All Albums | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Boost issues
Hey guys, so for the last couple of months now ive been having boost issues. first off i wouldnt hit above 7.5psi which is usually wastegate values, and replaced my pipes and my boost control solenoid. Now i manage to get 14psi but it flucuates as i hit boost. for example:
i might floor it and it goes up to 14psi, down to 7psi and back up constantly, as if the car isnt able to hold boost, but then regains it now sometimes i only get 7psi and then it goes back to 15psi, so what i did was completely run the car without the boost control solenoid pipes connected, i just bypassed it and i managed to get the car running at atleast 15psi in every gear. what i want to know is if anyone has any ideas what it could be and what i can check? by the sounds of it, it seems like the second hand boost control solenoid i bought is faulty as well? maybe time to upgrade to three port? or is my wastegate actuator on its way out? i have tightened the arm once around to see if that was the case and the actuator isnt holding the boost as well and no fix. do i tighten more? i still have the wastegate pill in the pipe and all connections are the right way around car is a 2002 bugeye wrx, normal service and stuff. has a 3" catless exhaust from turbo but it has been happening way after i put the exhaust in. other than that, the car is basically stock cheers fellow rexxxersss, Josh |
#2
|
||||
|
||||
Check all of your boost lines and air hoses.
Look for splits in the lines & T pieces, and make sure your intercooler & BOV hoses are intact and sealed. Any joins in the boost lines should be tight and cable tied on to be safe. |
#3
|
||||
|
||||
restrictor pill missing?
__________________
The one perkent... |
#4
|
||||
|
||||
@jezza
ive checked all lines and all the pipes are new :s @tony the restrictor pill is there ive checked the basics, just dont know what else to check |
#5
|
|||
|
|||
I wouldn't be adjusting the waste gate arm at all,
Those lines are prone to going hard and brittle, have you made sure there is now tiny cracks in any of the lines? |
#6
|
||||
|
||||
all lines on the car have been checked and i gave up so replaced them all :P could it still possibly be that the new "second hand" bcs sticking or something?
|
#7
|
|||
|
|||
Possible, were the lines replaced with good second hand lines? Or just with generic lines?
Is the restrictive pill facing the correct way/in the correct position? |
#8
|
||||
|
||||
Oh I see. My brother replaced the lines on his, and as a result, the restrictor pill was not held in place properly and did not work. Best to use genuine/used hose where the pill is, as it has proper fitment
|
#9
|
||||
|
||||
They are all brand new hoses, but what i did was i kept the little black piece of hose that has the restrictor pill in it. i did a pressure test on the hose at a mates mechanic shop and the hose has no leaks. and the restrictor pill is still there, does it have to be in the same spot in the hose and turned around a specific way? i think its currently about half way down the hose, thanks for all the support so far
|
#10
|
||||
|
||||
sounds like your BCS is faulty or you snapped your restrictor pill.
__________________
The one perkent... |
Tags |
boost, issues |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boost issues | Jordiee | Mechanicals | 11 | 08-08-2010 06:11 PM |
EOI: Blitz Dual Electronic boost controller | apg39 | For Sale | 0 | 06-05-2010 07:43 PM |
Boost Issues on my GC8 Wagon | Neil-e-o | Mechanicals | 17 | 27-04-2010 06:47 PM |
Blitz I Colour Boost Controller | T-REXX | The Former Workshops Forum | 0 | 24-03-2008 07:37 AM |
Blitz Sbc I-color Turbo Boost Controller - Metal Black | D34THROW | For Sale | 4 | 15-01-2008 02:30 PM |