Im piecing my new engine together im looking to run 272 cams and most things i read say get shim less buckets ... Im swapping all but the buckets in the head anyway is there a wrx model that has shim less???

my searching is going in circles




using the Perth-WRX mobile app

Convert to STI shim under bucket - that's what I did to the bugeye Wrx heads I used in my build with Brian crower 272's (10.2mm lift).

A word of warning - do not use titanium collets as they are prone to pulling through the valve spring retainers.

__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER]

So many head options decided avcs will be a muck round for now spoke to rossco on pwrx about his build and then called kris at rss

Gunna get the wrx big port heads and drop a set of late model shimless buckets in them with a few other goodies




using the Perth-WRX mobile app