Hey guys,

Just purchased a new blow off valve for my wrx and was wondering how would you get of the old melted blow off valve gasket of the top mount?
It's basically melted itself onto it

And where abouts could I get a new top mount gasket??

Cheers in advance guys


using the Perth-WRX mobile app

Gasket wasn't supplied? Check with supplier. No decent response then Subaru.

Regarding old gasket removal, plug hole with clean rag, orange oil usually works wonders, let soak, and scape off carefully with a plastic (if necessary metal) scraper to avoid scratching the face of IC.

__________________
[COLOR=Black]Liberty GT Spec B tuned 240 HP & 372 Nm at the hubs.[/COLOR] "Instead of banning high performance cars - ban low performance drivers"

Maximum Motorsport has heaps of them. I used a razor and thinners. Was still somewhat visible but smooth to the touch

using the Perth-WRX mobile app

__________________
wrxy comes later..

Nah it wasn't supplied I'll have to go to Subaru, could i get that from auto one or something?

Ok cheers heaps mate!


using the Perth-WRX mobile app

This would also work.

__________________
[COLOR=Black]Liberty GT Spec B tuned 240 HP & 372 Nm at the hubs.[/COLOR] "Instead of banning high performance cars - ban low performance drivers"