Hey fellas,

So I bought some sti HID headlights and decided to install them but failed due to my lack of knowledge. I'm Looking for someone to install them or even teach me the way of the wrx....... or even throw prices at me.

Cheers

i think seeing mao at evolution R would be the way forward for you

i'm currently looking in this myelf and some searching on this led me to this

Sweet thanks man will hit mao up, if i find out anything ill let you know

There is a DIY on here somewhere. I think from memory balistic wrote it up a few years back.

Its not to hard to do. The lights should come off without to much disassembly. The front grille and those 2 plastic inserts either side of the grille need to come out. 3 bolts and the headlight comes out with a mad twisting action.

With regards to the HID. ( assuming your using stock ballasts etc.) Stock location for the ballast is behind the front bumper on the supports.
If your using after market hid kit. Find your low beam wires. Cut the plug, rejoin onto ballast. Cut grommet hole in the back of the lamp cover, fit up & test.

__________________
2016 Subaru Outback - Work Wagon
350NM of CVT Goodness
Pit Crew, shit talker.

with the jdm bugeye sti headlights, the projectors are to suit HID globes yeah? what happens if you just put normal globes in it?

the world explodes.

Its a little bit trickier to wire up the jdm 02 hid headlights into the wrx. I have wired mine up befor but the low beam would turn off when the high beams turned on, you should have both low and high beam on at the same time. Solution I bought this CLICK from the land of stars and stripes.

__________________
race tape y pipe running .05 bar till spares turn up.

They work like mine. Perfectly. And you dont have to buy $100 globes every year because the ballasts crap out.

__________________
Huge range of extinguisher brackets for cars!

http://kap.industries/

I am yet to change a blown globe / ballast as yet

__________________
race tape y pipe running .05 bar till spares turn up.