Most definately, horses for courses.
Just showing what could happen if you did roll. Which can happen unplanned and unexpected.

__________________
Balls.

Never thought this would be such a heated topic :P, this is only for the odd AHG day to keep me in my seat.

I ordered one of these today:

http://cgi.ebay.com.au/Genuine-SPARC...QQcmdZViewItem

It has been sent out already and should be here monday then will need to take her somewhere to get mounting sorted out. As I said only to hold my while doing the odd AHG day nothing serious. So I think a cage is overkill in my situation, but down the track if I get into something more serious I will look into it then.


Thanks for all the opinions

__________________
LOL HEY GUYS IM JUST FUCKING HILARIOUS

"Usually. Some guys can only dribble while others can shoot three pointers, so it might not make any difference how far they shoot. But in my case, it does."

There are some serious potential roll over hot spots @ AHG, so don't assume you'll never roll it - the drop off edge along the runway side is just asking for it.

__________________
MY09 Evo X - 1.6bar@3500rpm - got lag?
Barbagallo - 56.03 (S); 1:08.09 (L)
Collie - 50.77
Possibly the most under-driven Evo X in the world??

Ok harness has arrived.

Installation wise can anyone give me pointers where to install the hooks. For the rear one I was thinking of replacing the seat belt and buckle bolts with the eye.

Then for the front replace the left hand seat rail bolt with an eye, and then then front seatbelt bolt. Will this work or am I dreaming?


Cheers

__________________
LOL HEY GUYS IM JUST FUCKING HILARIOUS

"Usually. Some guys can only dribble while others can shoot three pointers, so it might not make any difference how far they shoot. But in my case, it does."

For those in the know:

- How effective are harnesses with stock STi (06) seats?
- How significant is the benefit of using the harness with a proper race seat?

Cheers in advance.

__________________
TD06 - Oink.

For the belt ey bolts you can just replace the existing bolts with eye bolts. For the shoulder straps you'll need to get some inserts welded in to ensure that the belts 'fall' within the correct angle. If you use the rear seat passenger belt holes the angle of the belt will more than likelybe outside the tolerance set by CAMS and therefore you could fail sctutineering.

Once you've got a race seat in the standard belt is next to useless as they generally sit over the top of the seat and do not hold you in. Sjould you ever be in an accident there is more chance of you submarining into the footwell.

Glad I read this! Didn't think of that, just put a new seat in. Might start using the harness as well now.

__________________
[COLOR="Red"]I have the right foot of Subaru death![/COLOR]

[SIGPIC][/SIGPIC]
365hp and 515nm

New Beast to arrive April 2015 - 365hp, 450nm, 0-100 in 4.4sec. AMG Goodness!

I ended up using the rear seatbest holes. I went to an AHG day and was told by a couple guys there that it should be fine. I was very happy with the harness best investment I ever made made driving a whole lot better. Was not thrown around and decided with the harness I will not need to get new seats.


Cheers

__________________
LOL HEY GUYS IM JUST FUCKING HILARIOUS

"Usually. Some guys can only dribble while others can shoot three pointers, so it might not make any difference how far they shoot. But in my case, it does."

Which would be illegal.

__________________
https://www.facebook.com/JanGlovacPhotography

MY05 STI track car | VF Clubsport

Which I know.....

__________________
[COLOR="Red"]I have the right foot of Subaru death![/COLOR]

[SIGPIC][/SIGPIC]
365hp and 515nm

New Beast to arrive April 2015 - 365hp, 450nm, 0-100 in 4.4sec. AMG Goodness!