|
Register | Diddy Kart | Articles | All Albums | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
vf34 and fmic on std ecu?
I guessing/presumeing that i would get away witha fmic on amy99wrx with out having a re-map
what i mean is do the aussie ecus runas rich as the uk ecus from factory? but will i get away witha vf34 as well or am i asking for trouble?? if so can these ecu's be ecotek like the uk or will i have to for a verso/autronice route?? and how much would that cost?? just wanna find this out before i ring the guy with the blue wrx and make a offer as i think i will go with that now... |
#2
|
||||
|
||||
Eric runs a 34 on a FMIC on GC8, i run a STi TMIC with waterspray on a GD and we're making pretty much identicle pwr/trq.
Can you Verso a GC8? I think not. FMIC/Turbo mods are always going to benefit from a good tune, regardless of ECU i think. It might go alright with the std ecu, but to get the most from it you'll need aftermarket ECU options as you've mentioned, Autronic/PowerFC etc etc. If i were buying it i would be a little worried about the AFR's. |
#3
|
||||
|
||||
thats what i am saying wil it run lean, way too much when on boost or will the stock ecu just about cope??
i supose i could fit a knocklink but i dont know of many poeple who have fitted a vf34 to a classic and not had a re-map...... |
#4
|
||||
|
||||
If i was buying a GC8 with a 34/205/FMIC .. First thing i'd be doing would be wacking it on the dyno to see where i stand.
If the AFR's were all over the place and shit didn't look good an aftermarket ECU would have to go in and iron it all out so you've got a nice clean tune which is safe for the motor. A 34/FMIC/205 will go good, no doubt about that, you'd just wanna be sure that it's got the an uprated fuel pump/injectors (duty cycle) to ensure it's not running lean etc. |
#5
|
||||
|
||||
yeah it has a walbro pump and i thought/think the 440s (yellow tops) are upto it easily arent they??
so what would i be looking at for a re-map i presume say rms can re-map the std ecu?? |
#6
|
||||
|
||||
Not sure on that one - I'm sure some of the GC8 boys will be able to give you the heads up on that one, although i haven't seen many GC8's re-mapping the OE-ECU around here, so i suspect an aftermarket ECU will be required to ensure it's all tuned up correctly.
It might be running alright on the stock ECU but a good tune will not only ensure safety to the motor but also make it so that it's not a big hit of boost and then it falls down towards the redline which it what tends to happen on untuned cars with mods with no tune. A tune will smooth it all out so you're getting max power all the way through while running at a safe AFR. I'd expect around 180/200awkw on a 34 tuned up on a 205 around 18-20psi. |
#7
|
||||
|
||||
You can't tune the 99 WRX. All mods will cause it to run poorly and end up damaging the engine. I made this mistake and blew mine up! You need to use fuel management system to cope with any mods. Air filter and exhaust would be just about all i would do to a WRX running standard computer
__________________
BTS Bathroom Renovations/Tiling Phone: 0406647612 phone: 93091975 [email]brendanstiling@iinet.net.au[/email] [url]www.brendantiling.yodel.com.au/[/url] |
#8
|
||||
|
||||
Definitely can't tune stock GC8 ECU
__________________
BTS Bathroom Renovations/Tiling Phone: 0406647612 phone: 93091975 [email]brendanstiling@iinet.net.au[/email] [url]www.brendantiling.yodel.com.au/[/url] |
#9
|
||||
|
||||
yeah i know nice one
yeah been told the ecu's over here cant be re-mapped (my99/00) already too just dont understand why though, coz all we all do in the uk is re-map the std ecu with ecutek 3 and jobs done its only when we go past 400hp we start looking for aftermarket ecu's well on the my99 onwards anyway |
#10
|
||||
|
||||
Yeah, not too sure exactly why but I was in the same situation as you and ended up spending a fair bit doing fuel management. You then have the cost of a tune after any mods you do. A tune is around 600
__________________
BTS Bathroom Renovations/Tiling Phone: 0406647612 phone: 93091975 [email]brendanstiling@iinet.net.au[/email] [url]www.brendantiling.yodel.com.au/[/url] |
Tags |
ecu, fmic, std, vf34 |
Thread Tools | |
Display Modes | |
|
|