|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Brake Squeal Only In Reverse - Any Thoughts?
Hi guys, my car is giving out a loud sharp squeal only in reverse (when coming out of driveway or parking lot etc). Any thoughts? The car is MY11 STI.
Thanks in advance. Joel |
#2
|
||||
|
||||
I have a thought, don't reverse and you won't hear it!
Sorry i had to do it!
__________________
Looking for track days? Look up WA Trackdays on Facebook |
#3
|
||||
|
||||
pad wear indicator?
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#4
|
|||
|
|||
Not sure about that, only took the delivery last week so it shouldn't be the case. Probably the last thing I want to do is bring it back after a week. Anyone encounter this before?
|
#5
|
||||
|
||||
Sorry mate crystal ball is cloudy seeing as no one would know how many km your pads have done except you.
They're probably not even bedded in properly yet (about 500km), take it out and get them hot to burn some resin out of the green pads & see if the noise disappears.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#6
|
||||
|
||||
My stepdad had the same problem when he took delivery of his my10 WRX, the issue was the rear calliper(s) sticking to the disc due to being engaged for a month straight before the brakes where even worn in..
|
#7
|
||||
|
||||
I'm with Rossco, take it for a nice long run with plenty of braking and see if that helps. maybe a run up/down the coast???
|
#8
|
||||
|
||||
1. open boot
2. remove duct tape from her mouth 3. shove a sock into her mouth 4. reapply duct tape problem solved
__________________
There's a hoon in every Typhoon |
#9
|
||||
|
||||
Ditto to Rossco's suggestion.
I have had similar issues (MY02 WRX). Do you brake hard? After taking mine in it was suggested I was braking too hard (going forward). Pads had a lip on them. Once scimmed they were fine. Doubt that would be the case with yours if it was in the workshop only a week ago. Good luck. Last edited by silver_opal; 27-02-2011 at 12:33 PM. |
#10
|
|||
|
|||
This could be a possibility because I picked up an ex-demo. There is 3ks on the clock unless they changed a new pad before the delivery, which is doubtful. I'll drop them a line tomorrow and check if it's an "abused" or new pad which require bedding. Thanks for the input.
Quote:
|
Tags |
brake, reverse, squeal, thoughts |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADR approved braided brake lines - some information regarding legalities. | BALISTC | Mechanicals | 4 | 27-12-2010 09:51 AM |
Brake squeak only when in reverse?? | Robs Rex | Mechanicals | 4 | 12-10-2010 09:57 AM |
brake squeaking while driving | Jordiee | Mechanicals | 51 | 05-10-2010 06:19 PM |
ACRE JAPAN - Brake Pads | Vision R | The Former Workshops Forum | 12 | 07-02-2009 02:53 PM |
brake pads | abykos | General Subaru Discussion | 0 | 04-08-2005 12:01 PM |