|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Worn clutch pedal
heyas,
i have a MY08 WRX with a problem with the clutch. the pedal itself. At first i thought it was just adjustment, but after taking it for a service i was told that the pedal itself was worn. Where the pin goes through the pedal is worn into a jellybean shape causing lots of play in the pedal. the engagement point is 1/2 way in now and it sticks after engaging where i have to put my foot behind it to bring it back up, very annoying to drive. the guys at STechnic quoted me ~$300 for a pedal plus labour, but suggested that i take the car into the dealer for warranty. i met with Brad down at city subaru who initially told me it should be a warranty job. after waiting for his call for 2 days then chasing him up, he has told me that the pedal isnt covered because its worn due to the clutch itself being worn and getting heavier then wearing the pedal itself. im not buying it. i said "that isnt good enough" he replied with "that is good enough" cheeky shit. i spoke with subaru and they were going to call brad and discuss and call me back, havnt heard back from them yet. not sure if this is worth pushing, i have read many threads on US sites about problems with the whole assembly breaking at the welds causing problems with the pedal, but not sure if that affects the RHD cars. should i just get a aftermarket pedal and maybe clutch be done with it, what do you think ? the car has done 66600 kms |
#2
|
||||
|
||||
I'd push the point of warranty. Dealers are always going to say things are void because they can charge more for work outside of a warranty claim.
__________________
[SIGPIC][/SIGPIC] |
#3
|
||||
|
||||
I believe that 66,000km is not a reasonable life expectancy from a clutch pedal. I would expect the pedal to last the life of the car. There's a limit to how much resources you waste trying to get them to do it I guess but I would expect a better explanation that that.
Last edited by dtrally; 23-06-2011 at 08:26 PM. Reason: spelling. |
#4
|
||||
|
||||
Warranty dude. It is common on welds on clutch cages to break and pedal pins to deform, But a 2008 vehicle with 66,000ks is just unforgiveable.
After that you should physically strengthen the assembly by putting some welds onto the cage itself to strengthen it. Regards, Mao Quote:
|
#5
|
||||
|
||||
Drive your vehicle through their front window.
When asked why "my foot slipped off the clutch pedal as it broke - the one you said was good enough"
__________________
I am only an asshole on the internet :) [SIGPIC][/SIGPIC] |
#6
|
|||
|
|||
haha
thanks guys, im not going to stop until i get it replaced under warranty. i really like WRXs, this is my third and i have been seriously thinking about getting a MY11. |
#7
|
||||
|
||||
Quote:
But if you modify it, you will definitely void warranty on that part.
__________________
Its just the internet dude, its not real. F.B. Racing 01 WRX (STI badged) 2010 XR5 Focus 06 Impreza Hatch 2.0i |
#8
|
||||
|
||||
Bring it in to us at SUbaru Wangara for a look if its not to far.
__________________
Its just the internet dude, its not real. F.B. Racing 01 WRX (STI badged) 2010 XR5 Focus 06 Impreza Hatch 2.0i |
#9
|
||||
|
||||
Quote:
I really like this comment Is it the pedal that is worn or the bushes? are the bushes available separately? This is a really strange thing to happen. I have done a few sets of bushes in my life but it isnt a normal service item to say the least. Id say there must have been something wrong from the factory.
__________________
Version 6 STI |
#10
|
||||
|
||||
Push the warranty as far as you can. You've paid for it, now they are just being annoying shits.
Move it higher through the Subaru chain if there is no simple resolution. Then pull the old ACA/TT ace card if needed. A clutch pedal should not fail at all.
__________________
[COLOR="Gray"]550Nm off a 2L... Just wish it was in the dak dak...[/COLOR] |
Tags |
clutch, my08, pedal, worn |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[review] Exedy 6 Speed Racing Clutch Stage 1 Heavy Duty - #15803HD | HKS200 | Mechanicals | 27 | 10-08-2011 06:43 PM |
WTB Worn MY 07 on WRX clutch & pressure plate | Pimpreza | Wanted | 3 | 19-10-2010 11:49 PM |
Brake and clutch pedal pad | wilkem01 | Wanted | 2 | 16-03-2009 03:47 PM |
Wanted: Stock WRX GC8 clutch pedal assembly | tuna | Wanted | 2 | 09-05-2008 07:18 AM |
Polars DYI- Removing empty/dead clutch pedal travel | POLARBEAR666 | Mechanicals | 14 | 02-07-2007 09:47 AM |