Shut it down before, all good after they took it off and tuned it accordingly


using the Perth-WRX mobile app

OK. sounds like the stock ecu could not add in enough fuel to compensate for all the additional air that the CAI was sucking in. just a guess.

i really don't know why people bother with CAI for stockish wrx's. the stock airbox is not a restriction for most people's power needs.

Yeah I was hopeful that the Deatsch Werks 65c fuel pump might help but no joy


using the Perth-WRX mobile app

Craig Na not a 255/257 was 205 now 207 not sure if the older ones maybe easier to tune with cai mines 2001

using the Perth-WRX mobile app

Yeh I fairly sure it was a 207, just wanted to check. The 2.5's are/were finicky in regards to CAI. The US don't seem to have much of a problem though

__________________
[I]trolololol[/I]

The grim speed has a correction method called air straightening. It's the insert that can be seen in the inside of the intake pipe in there photo. It shows the issues you have with the MAF positioned next to the air cleaner/ pod.

I believe in changing the factory solenoid over. But I see no point in fitting a aftermarket boost controller to our late model cars. The factory ecu is very good in it's control.

Gordens car apparently had issues with the factory boost controller. I would of liked to see a party not involved in the debaites on here like BYM look at what was causing the issue. We then could get a better understanding on the subject.

I think a few tuners struggle with the factory boost controller and how to set this function correctly.

Speed density is the go, get rid of the MAF

Million dollar question which would you pick the Aem or grimmspeed?


Please dont say stock box...

__________________
Wannabe Boy Racer- WRX 09 Slim Sedan 268.6HP 376.0 NM @1.2 Bar

Much wow
many powerr
very siberu

I would go

Process west
Tho I have a good mate with a AEM and has no issues. Tho I believe it has to do with the tuner

https://m.facebook.com/BoostedPerformanceTuning

As above. If I ever did go for a CAI I would go for the PW unit just for the fact that it has been made here and tested on Australian cars, on our fuel, in our conditions. Fucking expensive though.

__________________
[I]trolololol[/I]

$400 from Mrt that's priced well if you ask me same price as aem.
http://www.ebay.com.au/itm/Process-W...item23494373df

Aem has option for a filter this hydro resistant cover + Dryflow filter which is
awesome if you ask me

Choices, Choices

__________________
Wannabe Boy Racer- WRX 09 Slim Sedan 268.6HP 376.0 NM @1.2 Bar

Much wow
many powerr
very siberu