|
|
LinkBack | Thread Tools | Display Modes |
#541
|
||||
|
||||
Get a trade acc too i saved 25 on a 4" 90 using my mates
using the Perth-WRX mobile app |
#542
|
||||
|
||||
MC Motorsports photos came up on my news feed... Was this a fun moment
__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR |
#543
|
|||
|
|||
Ha. Yeah. That was nuts. Still need more rear grip.
__________________
Doing it for all the wagons out there |
#544
|
||||
|
||||
You've got plenty of rear grip you just need to dial it in.
You went from sliding sideways to bouncing sideways. Tweak your setting to somewhere between the two and you'll get there.
__________________
605whp Quarter Mile in 10.9 seconds @ 135mph /217kph 0-100 kph 3.2 seconds |
#545
|
||||
|
||||
Awesome Bram!!!
__________________
Huge range of extinguisher brackets for cars! http://kap.industries/ |
#546
|
|||
|
|||
Skids.
This is my fastest run from Sunday.
__________________
Doing it for all the wagons out there Last edited by Bram; 14-06-2016 at 11:13 PM. |
#547
|
||||
|
||||
Lifting is for losers
Great car control mate and good to see the new set-up is very competitive!
__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR |
#548
|
||||
|
||||
Haha wrestlemania! Good work!
__________________
Bye bye betty blue. Hello F6. |
#549
|
|||
|
|||
Finally got this badboy framed. Turned out awesome except for one little thing that i noticed right away and annoys me. The image isnt centralised in the picture frame. I think its sitting just a little too far to the right.
__________________
Doing it for all the wagons out there |
#550
|
|||
|
|||
Rd 5 of the MC Motorsport WA Sprint Champs was canned due to noise complaints and whatnot. Apparently some cok-sucker complained about noise from last weeks event there. The track is on the international airport land. There is jumbo jets taking off every 15mins,and this arse bandit is complaining about some cars belting around on a track.
So instead of prepping for racing, I TIG'd up a custom coolant overflow bottle. The idea here is I can posistion the new bottle a bit closer to the battery and headlight, leaving space for a FMIC piping to come up where the old plastic bottle used to sit. The tank is basically some 3" tube, with 2 x 3"end caps welded on. I then welded in a filler neck on top of one end cap. And an AN4 port at the bottom for the coolant to fill/siphon back from. I also added 2 x 1/2" tube bends at the top and bottom, and put some clear tube inbetween to use as a sight level indicator. Then lastly welded on 2 small brackets to mount to some existing bolt holes on the car. It is a bit heavy. But my ali welding skill is not up to task yet. So its pretty much all 1.6mm thick SS304.
__________________
Doing it for all the wagons out there |
Tags |
sled, yeti |
|
|