|
|
LinkBack | Thread Tools | Display Modes |
#81
|
||||
|
||||
im very surprised.
i dont know much about the verso tunes and ive never dealt with RaceTorque but all i can say is, ive seen 2 of the same cars with the same mods put out diiferent numbers... could be just unlucky or could still be just the tune/ software itself... thats making your numbers different from mine. could even be the way the car was dyno'd 3rd or a 4th gear pull. I dont know, but i agree with everyone else. you have a great looking car and i know they drive awesome. ENJOY IT brother ) PS the DBW lag can be sharpenned up a shitload - but be aware it gets annoying clutch in and out all the time in peak hour :P well worth it tho. you are welcome to PM me if you want more details mate. Quote:
__________________
Ewrxion87 P-West TMIC / ecutek / HF CAI / Turbosmart / Apexi / Federal / 19psi / bc racing & whiteline / Perrin Performance / Rays |
#82
|
||||
|
||||
Trolley
did the turbo inlet hose end up being installed as you said it may not ? im looking for one and a specific vendor i deal through says it takes up to 5 hrs to fit the pipe as the manifold has to come off...."im sure perrin version fit straight in" ? anyways i refuse to pay 5 hrs labour for an apparent $400 part.... let me know mate cause if its DIY i will be... cheers Quote:
__________________
Ewrxion87 P-West TMIC / ecutek / HF CAI / Turbosmart / Apexi / Federal / 19psi / bc racing & whiteline / Perrin Performance / Rays |
#83
|
||||
|
||||
260HP ain't bad at all Craig. You have a nice torque spread over 3k.
Im with Kato in getting some handling mods on the thing and then having some fun @ RAC. **edit** Think you could do a small vid of the sound with the headers on there now? Last edited by monkeee; 14-01-2012 at 12:50 PM. |
#84
|
|||
|
|||
Don't compare your car to ewrxion87, he's full of shit! The only graph he's put up in the performance thread conviently chops off the final figures on the bottom of all mms graphs, and its nearly impossible to make out the left hand scale.
But it looks more like about 170kw/227hp, not 272. Last edited by stoff; 14-01-2012 at 05:16 PM. |
#85
|
||||
|
||||
Quote:
Quote:
I have a video on my "to-do" list. I'll try to drag the missus out and get her to film me doing a take off and drive-by. Alternatively pm me your address and I'll flog past
__________________
[I]trolololol[/I] Last edited by TROLLEY; 15-01-2012 at 12:05 AM. |
#86
|
||||
|
||||
The stock intake pipe is a piece of shit. I would not hesitate ripping it out and breaking it to get a new silicone unit it, seriously.
__________________
[SIGPIC][/SIGPIC] Should have bought an STI |
#87
|
||||
|
||||
Richx,
completely agree mate, but apparently it takes up to 5 hrs to move manifold etc etc... $400 part plus 5 hrs labour..... id love to be able to do it on my own.. but thats a big job on a reasonably new car to stuff up. completely disheartened... not getting headers/ uppipe, pulley or inlet hose now... over it.... gonna cost me a 1400 in labour on top of the parts cost... rediculous imo saving up for cosworth front mount and a td05 18g /20g twinscroll around June... and fuel pump and injectors i spose too if you have recommendations for an 08 model feel free to add your opinion / advice. Trolley - cheers mate that clears a few things up...my stock inlet hose isnt coping with boost.... my car is getting tired very quickly - needs retuning (i rekon its a airflow issue and fuel mixture as i can smell petrol burning). can just about guarentee the horsepower i was getting i aint anymore.
__________________
Ewrxion87 P-West TMIC / ecutek / HF CAI / Turbosmart / Apexi / Federal / 19psi / bc racing & whiteline / Perrin Performance / Rays |
#88
|
||||
|
||||
Craig ---- What you have is good enough. Numbers don't matter as different dynos, different atmospherics produce variances. What matters is how it drives on the road and if you are happy with the response, then it is all that matters.
Ewrxion87 --- 272hp vs 436Nm, the torque is definitely at the flywheel though. EDIT: 272hp is good power regardless! Now you boys must decide how to use that power to good use on the drags, skids or track. Last edited by mao; 16-01-2012 at 12:26 AM. |
#89
|
||||
|
||||
the graph is on one of these threads... shows otherwise...mms did a good job but either way your right at the moment the car is performing terribly....
i need it retuned asap and i cant get to mms for the ecutek guy to fix it cause im working away - dont know which other vendor is pro at ecutek... dont suppose you can hook me up with a good twinscroll turbo kit for a decent price fitted fmic or good tmic twinscroll or gtr30 /35 or similar injectors probably fuel pump what would be a ball park figure so im thinking realistically? i want 300 to 350 hp atw for the coutesy of this thread pm me and il chat with you in more detail if you can help me. Quote:
__________________
Ewrxion87 P-West TMIC / ecutek / HF CAI / Turbosmart / Apexi / Federal / 19psi / bc racing & whiteline / Perrin Performance / Rays |
#90
|
||||
|
||||
350hp (261kw) at the hubs won't happen on stock ej255 internals for long (if at all).
Maybe if all your dyno runs are done in 3rd like your last one....... lol! fyi: 350 hp at the hubs would be in the ball park of ~ 440 HP (300kw) at the flywheel..... 77% more than the 169kw (226 hp) it came with good luck with the cadbury pistons & wafer cylinder walls of the 255.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
Tags |
betty, craigh, dak, my08, red, verso, wrc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Miss Firing DAK DAK DOINK | magic1 | Mechanicals | 79 | 04-07-2011 11:09 AM |
My08 Red Ugly Betty!!! | BLAAA | For Sale (Cars Only) | 1 | 02-07-2009 05:55 PM |
New Betty | 1233Z | Introductions | 27 | 19-04-2008 10:07 AM |